• +91-9696333549, 9415116688
  • thehamam99@gmail.com

Handling, Job Finishing And Installation Instructions

    • Deliver door(s) to building site after plaster or cement is dry. If doors are stored at job site for than one week, all edges should be sealed.
    • Handle with clean gloves and do not drag doors across one another or across other surfaces.
    • Store doors flat on a level surface in a dry, well ventilated building. Cover to keep clean, but allow air circulation.
    • Doors should not be subjected to excessive water, abnormal heat, extreme dryness, humid condition or sudden changes therein. They should be conditioned to average prevailing relative humidity of the locality before hanging.
    • The utility or structural strength of the door must not be impaired in the fitting of the door, the application of hardware, or cutting and altering the door for lights, louvers, panels, or any other special details.
    • Solid core doors 6´ and above, require 3 hinges. All doors greater than 7´0½ require 4 hinges. Field trimming of doors will avoid the warranty.
    • Before finishing, remove handling marks or effects of exposure to moisture through, final sanding over all surfaces of the door using fine grit sandpaper. Clean before applying finish.
    • Always apply wooden border of 4mm and above on all edges to avoid moisture gain. Doors without border will not be covered under warranty.

The Hamam Instructions

Made of 100% seasoned and chemically treated.

All products matches international standards.

We Customize designs on your requirment.

Ensure accuracy & sophisticated look.

General Provisions And Limitation Instructions

If a defect occurs, The Hamam, at its discretion and maximum, will furnish a replacement door, repair the door or refund the original purchase price. The Hamam WILL NOT PAY THE COSTS OF LABOR INSTALLATION OR FINISHING FOR ANY REPLACEMENT DOOR.

The Following Exclusions Apply:

  • Any defects in the coatings or field finishes on the door & accessories.
  • Doors larger than 3´ 0 ½ x 7´ or greater that warp.
  • Doors over 7´ in height installed with fewer than 4 hinges.
  • Bow or misalignment in the frame of the jamb as hung.
  • Normal wear and tear.
  • We provide timely delivery and after sales services to our customers.
  • Improper use, installation, or lack of maintenance.
  • Doors made with different materials on either side.
  • Doors altered by other that contribute to door failure.
  • Incidental or inconsequential damage.
  • Failure to follow applicable handling, installation, care & maintenance instruction.
About Us

The Hamam is a company membrane premium door, embrossed door, designer laminated door, kitchen shutter, wardrobe shutter, HDF moduled, bathroom furniture, CNC routed jaali, Flush door, Membrane Door, Solid Wood Door. All doors are being manufactured at our state of art facility at Lucknow, using all imported raw material and latest.

ADDRESS
  • 5/ 626 Gomtinagar Vistar Shaheed Path Near Sadar Tehsil Lucknow 226010
  • +91-9696333549, 9415116688
  • thehamam99@gmail.com
  • www.thedarwaaza.in
Follow US
Location

© 2022 The Darwaja. All Rights Reserved

?>